Ultrasonic C-scan flaw detection equipment system for automotive parts

TG-310AP Ultrasonic C-scan flaw detection equipment system for automotive parts

Ultrasonic C-scan flaw detection system is widely used in automobile parts inspection, especially for the internal parts of automobile engines. It is professionally designed for the detection of the weld seam on the top of the tappet, which is a great reference for product quality control.

Model:
TG-310AP

Availability:

Quantity:



Inquire Add to Basket

Ultrasonic Flaw Detection

Ultrasonic Flaw Detection

Ultrasonic C-scan flaw detection equipment system for automotive parts

The single-channel digital ultrasonic flaw detector technic is used. The functions of the flaw detecion include the emission and reception of ultrasonic waves, the digital processing of ultrasonic signals, and the control of flaw detection parameters. The instrument uses an Ethernet interface, which is flexible and convenient, and has strong anti-interference ability. It is small in size and light in weight, and can be placed directly on the scanning arm to reduce the length of the probe line, thereby reducing interference and improving the detection signal-to-noise ratio. Independently developed and with independent intellectual property rights, the circuit can be optimized and adjusted according to different workpieces to meet the cutting-edge needs of customers.

Flaw Detection Technical Data

Ultrasonic C-scan flaw detection equipment system for automotive parts

Each axis of the scanning bridge uses a linear drive unit of a well-known domestic and foreign brand. It can realize multi-axis motion, multi-axis linkage and electric control functions. The servo motor and the guide rail connector use imported brand couplings. All axes have soft-controlled running limits and limit switches to provide protection. Limit brakes are installed on all linear axes to prevent system damage and collision with the workpiece being inspected.

Learn more

● Number of channels: 1 channel;
● Instrument type: industrial computer, mainly used for automated testing sites;
● Data sampling rate: 100MB/s, 10 bits;
● Operating frequency: 1-15MHz;
● Repetition frequency: ≤10KHz;
● Total gain: 100dB;
● Vertical linearity: ≤6%;
● Horizontal linearity: ≤1%;
● Dynamic range: ≥26dB;
● Sensitivity margin (2.5MHzΦ20): ≥42dB;
● Attenuator 12dB error: ≤±1dB;
● Resolution: ≥20dB castings, ≥26dB thin-walled tubes;
● Electrical noise: ≤10% of full screen at 80dB;

Flaw Detection Technical Data

● Number of channels: 1 channel;
● Instrument type: industrial computer, mainly used for automated testing sites;
● Data sampling rate: 100MB/s, 10 bits;
● Operating frequency: 1-15MHz;
● Repetition frequency: ≤10KHz;
● Total gain: 100dB;

More Info
● Vertical linearity: ≤6%;
● Horizontal linearity: ≤1%;
● Dynamic range: ≥26dB;
● Sensitivity margin (2.5MHzΦ20): ≥42dB;
● Attenuator 12dB error: ≤±1dB;
● Resolution: ≥20dB castings, ≥26dB thin-walled tubes;
● Electrical noise: ≤10% of full screen at 80dB;

More Info